OnePlus Pad 2 Pro (erhai)

erhai is the OnePlus Pad 2 Pro (OPD2413) with the SM8750 SoC. The port below is an independent community project. The UniXNU organization does not maintain it.

Repository	Maintainer	State
UniXNU-erhai	wally001012-cyber	XNU entry bring-up; root and userland not configured

State

Area	State
Board values	measured on the device: FD base 0xA7000000, GIC, timebase, panel, touch and boot partition
UEFI and payload	embed_payload puts the payload in the kernel field because the OnePlus ABL replaces the ramdisk field during fastboot boot
Kernel	source-only kernel built in GitHub Actions; the bring-up profile runs on the boot CPU with AMFI removed from the prelink
Screen checkpoints	green bar plus S1 to S6
Root, UFS and GPU	not enabled in this profile
Hardware result	the repository records the measured values and the expected S1 to S6 sequence

The board is modelled on the OnePlus 13T port. The current target is the XNU entry, not a root file system or userland.

Build

python unixnu --prepare
python unixnu defconfig erhai_defconfig
python unixnu bootimg --dtb <device.dtb> --ramdisk <payload.img> -o boot.img

Kernel and payload in GitHub Actions:

Actions -> erhai XNU (OnePlus Pad 2 Pro) -> Run workflow

Boot with fastboot boot boot.img only. Do not flash a partition.

Maintenance

The maintainer owns the repository and its release decisions. UniXNU documentation lists the port and its state; it does not take over maintenance.