Debugging and logs

A bring-up produces four kinds of evidence: serial output, the on-screen diagnostic page, the panic screen and build reports. Collect them together.

Log sources

Source	Transport	Use
UEFI serial	UART	Firmware, UniXNU and DarwinBoot
Kernel serial	UART selected by serial=	XNU console and panic output
Diagnostic page	Framebuffer	Live state after the console stops
Pulse strip	Framebuffer bottom row	Heartbeat while the diagnostic page owns the panel
Panic screen	Framebuffer	Panic text and registers
QEMU log	File	UniXNU and loader tests
Build reports	JSON	Input hashes and stage results

Serial console

Add the arguments to the payload:

[payload]
kernel_args = ["-v", "serial=3", "debug=0x14e"]

The UniXNU boot manager writes to the first EFI_SERIAL_IO_PROTOCOL instance. Its lines start with UNIXNU:. DarwinBoot lines start with DARWINBOOT:.

Capture the port:

tio -b 115200 -d 8 -p none -s 1 /dev/tty.usbserial-0001 -L out/serial.log

Other tools:

picocom -b 115200 /dev/tty.usbserial-0001
screen -L /dev/tty.usbserial-0001 115200
minicom -D /dev/tty.usbserial-0001 -b 115200

The board page records the UART pins and the baud rate. A board with USB device mode can expose a CDC ACM port instead.

Useful early output:

UNIXNU: UniXNU 0.1.0 starting as firmware boot option
UNIXNU: config: loaded \EFI\UniXNU\unixnu.toml
UNIXNU: driver ...: started
UNIXNU: menu: shown 2 entries, default 0
DARWINBOOT: loader v2 installed EL1
DARWINBOOT: ARM64 va=... pa=... args=... entry=... owned=...
DARWINBOOT: inputs validated; exiting boot services

On-screen diagnostic page

The diagnostic page is a full-screen text overlay drawn into the XNU framebuffer mapping. Enable it with:

boot-progress=1

Level 1 arms the monitor. The page freezes when no stage or storage activity appears for 30 seconds, or at the 120 second observation limit, and keeps the screen for a photograph.

boot-progress=2

Level 2 runs continuously. Deadlines are reported and the OS keeps running.

The page uses 48 rows of 120 columns. On a panel at least 2160 by 1400 the scale is 3.

Row group	Contents
Title	Build tag, live or stop state, reason
1	Time, idle, IRQ count, monitor count, root state, process count, free pages
2	Storage requests, verified blocks, failures, integrity counters
3 to 30	Stage history, process states, storage detail, last PC and registers
31 to 47	Cached storage output, UFS timing, memory, process sampling, UI trace, touch rows
47	Independent pulse strip

Label the image so a photograph identifies the build:

sheng-build-tag=ks-001

The title bar then starts with [ks-001].

When userland takes over the display and stops scanning out, take the panel back:

boot-diag-resume=10

After 10 seconds without a scanout, the page redraws. A new validated scanout yields the panel again.

The page reports:

Field	Meaning
time	Seconds since the monitor started
idle	Seconds since the last stage or I/O progress
IRQ	Interrupt entries counted by the monitor
monitor	Monitor thread iterations
lost	Dropped recorder updates
root	Owner root acceptance
procs	Process count
free	Free 4 KiB pages
requests	Storage requests
verified4K	Verified 4 KiB blocks
failures	Storage failures
integrity	Storage integrity failures
last PC	Last interrupt entry PC
TCR, TTBR, SCTLR	Translation control and table base registers

Pulse strip

The pulse strip is a 32-pixel strip at the bottom of the panel, drawn at 2x scale in green. It runs on a separate high-priority monitor thread at one second intervals.

P<turn> I<irq> M<monitor>/<seconds> B<bind>:<result> d<depth> @<base> lock<busy>/<render> PC<pc>

Token	Meaning
P	Pulse turn
I	Interrupt entries
M	Monitor count and seconds since it advanced
B	Framebuffer bind count, result and depth
@	Framebuffer base
lock	Recorder and renderer busy flags
PC	Last interrupt entry PC

The strip survives while the diagnostic page owns the panel. It closes when the OS takes over the display. boot-diag-resume reopens the page and the strip.

Panic screen

The payload can patch a panic screen into the kernel copy:

[payload]
panic_screen = true

The payload step runs:

python3 scripts/patch-xnu-entry-probe.py <kernel> --panic-screen --no-reset

The panic screen writes the formatted panic message and registers to the framebuffer and keeps the image visible. --no-reset stops the automatic reset, so the screen stays for a photograph.

The first panic message is also copied to boot_progress_panic_text. A panic on a secondary core parks that core; the live banner keeps the text after the screen is repainted.

The device tree panic region is available with:

CONFIG_XNU_DT_PANIC_REGION=y

The kernel reads /chosen embedded-panic-log-size and the region reg property. The region is validated before it is mapped.

User fault evidence

The fault probe records EL0 breakpoint and abort state before exception delivery:

Field	Meaning
pid, name	Process
PC, LR, SP, FP	Registers at the fault
ESR, FAR	Exception syndrome and fault address
slide	Shared region slide
x0 to x28	General registers
frames	Up to 12 return addresses

The capture runs in the trap path without allocation. A matching process exit prints the record with the signal. An uncaught exception reason is searched in the writable malloc regions of the exiting process and printed with the crash row.

UI stack trace

The UI trace samples the selected processes and prints PC, LR, FP and stack slices:

boot-ui-focus=launchd
boot-ui-focus2=SpringBoard
boot-ui-focus3=backboardd
boot-ui-focus4=Setup
boot-ui-chrono=1

The address tokens use a radix-64 alphabet to fit in the row width. Feed the transcribed rows to the decoder:

python3 scripts/decode-boot-ui-trace.py trace.txt

The decoder prints one JSON object per thread group with pc, lr, frames and error codes.

The trace rotates one page every 8 seconds. Take three or four photographs several seconds apart to capture every page.

Taking photographs

The diagnostic page is built to be photographed. Use this sequence:

1. Set sheng-build-tag to a short image label.
2. Enable boot-progress=1 for a frozen page, or boot-progress=2 for a live page.
3. Set boot-diag-resume when userland blanks the panel.
4. Place the device on a stand. Keep the camera parallel to the panel.
5. Turn off the flash. Light the panel from the side to avoid a reflection.
6. Lock focus and exposure on the title bar.
7. Fill the frame with the panel and include all four corners.
8. Photograph the title bar, then the full page.
9. For UI trace pages, take three or four photos 8 seconds apart.
10. Photograph the bottom pulse strip.
11. Record the boot image SHA-256 and the capture time.

Check	Why
Title bar readable	Build tag and state identify the image
No glare over text	Rows 3 to 30 carry the stage history
All four corners visible	Confirms the full panel and scale
Pulse strip visible	Shows the heartbeat at capture time
Two or more frames	A changing counter shows a live screen

A camera photo is evidence of what the panel showed. Keep the original file. Transcribe only the rows you need, and keep the photo with the transcription.

QEMU capture

python3 package/Scripts/qemu-run.py out/esp \
  --log out/qemu.log --screenshot out/qemu.png \
  --expect 'UNIXNU: menu: shown'

The runner writes the ANSI-stripped log to out/qemu.clean.log. --screenshot captures the panel when the menu appears. --keys sends QEMU key codes after the menu.

The stop helper records registers and memory at a symbol:

python3 scripts/qemu-entry/gdb-stop.py --help

Debug arguments

Argument	Use
-v	Verbose kernel output
serial=3	Serial console
debug=0x14e	Debug output mask
kextlog=0xfff	Kext logging
boot-progress=1	Diagnostic page with a 30 second stall freeze
boot-progress=2	Diagnostic page with continuous operation
sheng-build-tag=<tag>	Image label in the title bar
boot-diag-resume=<seconds>	Take the panel back after the OS stops scanning out
sheng-platform-stage=<n>	Stop the platform expert at a stage
sheng-touch=<n>	Touch probe stage
offline-legacy-phase=<n>	Display probe stage
-no_slto_panic	Suppress the SLTO panic
cs_debug=<mask>	Code signing output

Evidence bundle

Collect:

Item	Source
Serial log	UART capture file
Diagnostic photos	Title bar, full page, trace pages, pulse strip
Panic photo	Panic screen
Boot report	out/<board>/boot/boot.json
Payload report	out/<board>/payload/payload.json
Build logs	out/<board>/logs/

Record the boot image hash with every photo:

shasum -a 256 out/<board>/boot/boot.img
jq . out/<board>/boot/boot.json

Next steps

• Boot arguments
• Troubleshooting
• QEMU testing
• sheng device page