UniXNU

简体中文

English

简体中文

English

外观

三星 Galaxy S7 Edge（hero2lte） ​

DokuroMitsukai/UniXNU-hero2lte

Samsung Galaxy S7 Edge (SM-G935F) on Exynos 8890. Phase 1 is a Mu-Silicium UEFI firmware with display and keypad input. XNU uses ArmCpu's GICv2 path and still requires native storage, display, input and power drivers, plus verified EFS/CPEFS backups before any wipe.

源记录: porting.toml, 4086db3a4029a18ea089e7ce6355c089c58a2b09.

本页按设备记录自动生成。

部分状态
配置host-verified
固件与启动device-verified
CPU 与中断implemented
内存与 DMAplanned
存储与根卷planned
显示device-verified
输入device-verified
GPUplanned
网络planned
音频planned
电源planned
镜像组装planned
诊断planned

配置 ​

host-verified

硬件与依赖 ​

  • SM-G935F (hero2lte), Exynos 8890, bootloader G935FXXS6ESI4, framebuffer at 0xE2A00000.
  • iPadOS 17.7.11 build 21H461 is the only OS profile in this UniXNU revision.

配置 ​

  • board.soc = Exynos 8890; board.soc_source = exynos8890; board.os_profile = ipados-17.7.11-21H461; schema_version = 2.
  • Firmware paths select the DokuroMitsukai/Mu-Silicium hero2lte package and the five Mu_Basecore patches that package requires.

操作步骤 ​

  • Run ./unixnu defconfig hero2lte_defconfig -D ../UniXNU-hero2lte from UniXNU.
  • Run ./unixnu fetch -D ../UniXNU-hero2lte to resolve base sources and write unixnu.lock.
  • Run ./unixnu status --json -D ../UniXNU-hero2lte and review profiles, components, source pins and patch order.

开发经验 ​

  • The ARM64, SoC, OS and device tables merge in that order. Ordinary arrays replace inherited arrays, so board.toml repeats the complete component, fragment and patch-series lists.
  • The SM-G935F keeps TWRP on RECOVERY. No configuration step touches that partition.

完成条件 ​

  • All source pins resolve; every selected component has an area; status shows the intended profiles and patch order.

当前范围 ​

  • The published SoC feed is pinned in feeds.toml and unixnu.lock; fetch succeeds without a local source override.
  • The UEFI checkpoint exists; no XNU kernel, payload or storage checkpoint exists yet.

下一步 ​

  • Keep the published SoC revision synchronized between feeds.toml and unixnu.lock.

证据 ​

固件与启动 ​

device-verified

组件: DarwinBoot.

硬件与依赖 ​

  • Mu-Silicium hero2lte firmware, S-Boot framebuffer at 0xE2A00000 with size 0xE10000, UEFI FD base 0xB1200000 and size 0x200000.
  • Firmware version G935FXXS6ESI4 and the five Mu_Basecore patches used by the package.

配置 ​

  • firmware.config = hero2lte; DSC = Platforms/Samsung/hero2ltePkg/hero2lte.dsc; FD = Build/hero2ltePkg/{target}_CLANGPDB/FV/SILICIUM_UEFI.fd.
  • The package list mirrors the working Mu-Silicium build and adds {tree}/package and {tree}/drivers/DarwinBoot for UniXNU.

操作步骤 ​

  • The standalone build runs ./build-hero2lte.sh -c at the workspace root; test_bootshim.py and test_hero2lte_keypad.py pass.
  • The DSC and DXE.inc add UniXNU.inf, UniXNUDxe.inf, UniXNURamDiskDxe.inf, DarwinBoot.inf, DiskIoDxe, PartitionDxe, EnglishDxe and Fat behind UNIXNU_PAYLOAD=1.
  • ./unixnu build firmware --uefi ../Mu-Silicium --target RELEASE -D ../UniXNU-hero2lte applies the five base patches and builds the 2 MiB FD.
  • Flash the 40 MiB Android v0 boot image to BOOT from TWRP, verify the partition readback hash, and boot it.

开发经验 ​

  • The standalone image is an Android v0 header at 0x10000000 with kernel at 0x10008000 and tags at 0x10000100; the kernel field is exactly BootShim plus the 2 MiB FD.
  • S-Boot accepts both the stock-form image with DTBH and footer and the standalone v0 image; both reached the UEFI UI.
  • The standalone build is bit-for-bit reproducible and the DECON trigger is preserved instead of writing the Exynos 8895 value 0x1281.
  • With UNIXNU_PAYLOAD=1 the UniXNU firmware build links UniXNU, UniXNUDxe, UniXNURamDiskDxe and DarwinBoot. FVMAIN grows from 0x20a000 to 0x235000 inside the 2 MiB FD.
  • The safemem image with FD, stack and heap at 0xB1200000-0xBFF40000 reached UEFI. The bring-up image then toggled the timer block, accepted volume, home and power keys, and advanced the counter.

完成条件 ​

  • Firmware builds, enters UniXNU, publishes the framebuffer, keeps the payload FAT readable and preserves the reserved-memory ranges.

当前范围 ​

  • The UniXNU-integrated firmware (UNIXNU_PAYLOAD=1) has not been booted; no payload or boot image exists yet.
  • No ARM generic-timer interrupt has been delivered through the XNU path.

下一步 ​

  • Boot each firmware change to the UEFI UI; the next milestone is the XNU handoff with the GICv2 path now implemented.

证据 ​

CPU 与中断 ​

implemented

组件: ArmCpu, ArmDTPlatform, SoftwareAES.

硬件与依赖 ​

  • Four Mongoose cores at MPIDR 0x0-0x3 and four Cortex-A53 cores at MPIDR 0x100-0x103 with a 26 MHz generic timer.
  • GIC-400 at 0x11001000: distributor 0x11001000, CPU interface 0x11002000, GICH 0x11004000 and GICV 0x11006000; PPIs 13, 14, 11 and 10.

配置 ​

  • exynos8890.dtsi declares all eight CPUs, PSCI 0.2 over SMC, GICv2 and the generic timer. hero2lte.dts enables only cpu0 for the first bring-up.
  • ArmCpu and ArmDTPlatform come from the UniXNU catalog. SoftwareAES keeps the shared ARM64 component set complete.

操作步骤 ​

  • Compile the board DTS and inspect /cpus, /psci, /arm-io/intc and timebase-frequency in the generated ADT.
  • Record per-CPU entry, timer interrupts and IPI delivery on hardware.

开发经验 ​

  • ArmCpu accepts arm,cortex-a15-gic and maps the distributor plus the banked GICC, uses PPI 27 for the virtual timer, sends SGI 0 through GICD_SGIR, and leaves GICD_IGROUPR to firmware. A standalone QEMU GIC-400 test passes the timer and self-SGI path.
  • The stock timer node sets use-clocksource-only and Android uses MCT ticks for events. The architectural timer PPI is unvalidated on hardware.
  • Cluster 0 is Mongoose and cluster 1 is Cortex-A53 on this SoC, the opposite of the usual big-little numbering.
  • UEFI's ArmGicDxe path handled the GIC-400 and timer interrupts during the bring-up test: the probe toggled every 200 ms and key notifies arrived.

完成条件 ​

  • Every enabled CPU reaches its entry checkpoint and timer and IPI handling works on each enabled CPU.

当前范围 ​

  • ArmCpu's GICv2 path enables only the boot CPU interface; secondary-core bring-up is not implemented.
  • The XNU kernel handoff and timer delivery through ArmCpu have not been observed on hardware.
  • Only one CPU is enabled.

下一步 ​

  • Build and boot the XNU image with the GICv2 ArmCpu path, then extend GICv2 secondary-core startup.

证据 ​

内存与 DMA ​

planned

硬件与依赖 ​

  • RAM ranges from the stock DTB: 0x80000000 with size 0x7e400000 and 0x880000000 with size 0x80000000.
  • S-Boot framebuffer at 0xE2A00000 with size 0xE10000; the DT video_frame and video_scaler regions also reserve display buffers.

配置 ​

  • hero2lte.dts declares the low 0x7e400000 range as the XNU memory node and the framebuffer as reserved-memory.
  • The upper 2 GiB range is not described yet because the common ADT generator currently expects one contiguous memory node.

操作步骤 ​

  • Compile the DTS and compare the generated ADT memory range with the stock DTB.
  • Verify that DarwinBoot's owned window excludes the framebuffer and the DT video pools.

开发经验 ​

  • The earlier Mu-Silicium MemoryMapLib overlapped the DT video_frame and video_scaler pools. The safemem build now places the UEFI FD, stack and heap in the 0xB1200000-0xBFF40000 gap and reached UEFI on hardware.
  • The framebuffer lies inside the low RAM range, so the XNU PMAP must reserve it before XNU maps RAM.

完成条件 ​

  • Every handoff and reserved range is accounted for and DMA masters use only their allocated windows.

当前范围 ​

  • Upper 2 GiB RAM is unused.
  • The UEFI relocation is validated, but XNU reserved-memory conversion and framebuffer exclusion are unverified.

下一步 ​

  • Decide how the ADT generator represents the second RAM range and the display reservations, then verify the XNU PMAP.

证据 ​

存储与根卷 ​

planned

硬件与依赖 ​

  • UFS controller at 0x155A0000. The GPT uses 4096-byte logical sectors.
  • USERDATA is partition 18, first LBA 2085544, last LBA 7806207.

配置 ​

  • The SoC DTSI describes the UFS controller and leaves it disabled.
  • userdata geometry remains absent from board.toml until the storage milestone and wipe approval. EFS and CPEFS backups are now captured and verified.

操作步骤 ​

  • Capture EFS and CPEFS from TWRP with device-dump/capture-critical.py and verify both SHA-256 digests.
  • Select or implement an Exynos UFS host driver before enabling the node.

开发经验 ​

  • ShengUfs targets Qualcomm UFS and cannot be reused directly.
  • EFS and CPEFS were captured from TWRP and integrity-checked. The EFS images differ only in ext4 superblock counters; e2fsck reports the same 181 files and no errors.

完成条件 ​

  • Host facts match the board; reads return the expected GPT; the configured root volume mounts and launchd starts.

当前范围 ​

  • No storage driver.
  • No wipe or repartition is allowed until the restore procedure is tested.

下一步 ​

  • Select or implement the Exynos UFS host driver, then validate read-only access before any mount or write.

证据 ​

显示 ​

device-verified

硬件与依赖 ​

  • s6e3hf4 SVC_OCTA panel at 1440x2560, 32 bpp, handed over at 0xE2A00000 by S-Boot.
  • The stock DT reserves video_frame and video_scaler pools for the display pipeline.

配置 ​

  • Mu-Silicium SimpleFbDxe publishes a GOP from the S-Boot framebuffer address. No native display driver is selected yet.

操作步骤 ​

  • Build the Phase 1 firmware and boot it on the panel.
  • Record geometry, colors and backlight behavior before adding a native driver.

开发经验 ​

  • The standalone firmware rendered the Project Silicium UI and the missing-OS screen on hardware. BringupTestDxe drew its timer, key bars and counter at the expected top-left positions.
  • DECON's trigger register is logged and left untouched because the Exynos 8895 value is not evidence for 8890.

完成条件 ​

  • A known frame appears with correct geometry and colors, then userland presentation and backlight controls work.

当前范围 ​

  • Only the S-Boot framebuffer path is validated.
  • No brightness, panel power or native scanout driver.

下一步 ​

  • Add panel power and backlight control, then validate a native scanout path.

证据 ​

输入 ​

device-verified

硬件与依赖 ​

  • gpio_keys from the stock DTB: volume up GPA0-3, volume down GPA0-4, home GPA0-5, power GPA2-4, all active low.
  • The keypad banks are at 0x10580000 with DAT at offset 0x04.

配置 ​

  • Mu-Silicium KeypadDeviceLib polls the GPA0 and GPA2 data registers, applies a 20 ms debounce and maps press-only events to the menu.
  • The SoC DTSI does not export a pinctrl node because XNU has no Samsung pinctrl driver.

操作步骤 ​

  • Run Resources/Scripts/test_hero2lte_keypad.py in the firmware checkout.
  • Press volume up, volume down, home and power in the Phase 1 firmware and record the response on hardware.

开发经验 ​

  • The keypad host test passes. On hardware each key produced its expected BringupTestDxe bar and advanced the accepted-event counter.
  • Touch needs a separate component and has no driver yet.

完成条件 ​

  • Touches map to the display, simultaneous contacts keep stable IDs, release events arrive, and buttons produce expected HID reports.

当前范围 ​

  • The keypad path is validated only through BringupTestDxe; XNU gpio-keys integration is pending.
  • Touch has no driver.

下一步 ​

  • Add the XNU gpio-keys path and validate release events; then inventory the touch controller.

证据 ​

GPU ​

planned

硬件与依赖 ​

  • The stock DT exposes G3D power and DVS nodes but no Mali node.
  • The GPU model, power sequence and SMMU inputs still need to be recorded from the vendor kernel.

配置 ​

  • No GPU component is selected. The Adreno components target Qualcomm hardware and do not apply.

操作步骤 ​

  • Inventory the GPU from the vendor kernel and board files before selecting a component.
  • Record power-domain and SMMU requirements in this area.

开发经验 ​

  • No UniXNU component currently supports the Exynos 8890 GPU.

完成条件 ​

  • GPU submissions complete, mapping and fence handling are correct, a known image renders, and the selected Metal client presents it.

当前范围 ​

  • No GPU inventory, driver or hardware result.

下一步 ​

  • Identify the GPU and its power and SMMU inputs from the vendor kernel.

证据 ​

按下一步操作收集证据。

网络 ​

planned

硬件与依赖 ​

  • The stock boot DT has no wireless controller node; the chip must be identified from the vendor kernel and board files.

配置 ​

  • No network component is selected.

操作步骤 ​

  • Inventory the wireless chip, firmware files and bus before selecting a driver.
  • Add firmware paths and hashes to proprietary-files.txt.

开发经验 ​

  • Wi-Fi firmware and driver inputs are not collected yet.

完成条件 ​

  • Scanning, association, address configuration and sustained receive and transmit traffic pass with the selected firmware.

当前范围 ​

  • No wireless inventory or driver.

下一步 ​

  • Identify the wireless chip and its firmware from the vendor kernel.

证据 ​

按下一步操作收集证据。

音频 ​

planned

硬件与依赖 ​

  • The stock boot DT describes no audio route; the codec and DSP inputs still need to be recorded.

配置 ​

  • No audio component is selected.

操作步骤 ​

  • Inventory the codec, DSP and amplifier wiring before selecting a component.

开发经验 ​

  • Audio hardware and firmware inputs are not collected yet.

完成条件 ​

  • Each declared route carries the selected audio format through playback or capture and handles start and stop correctly.

当前范围 ​

  • No audio inventory or driver.

下一步 ​

  • Identify the audio hardware from the vendor kernel and schematics.

证据 ​

按下一步操作收集证据。

电源 ​

planned

硬件与依赖 ​

  • The stock DT names max77854 PMIC and MUIC, s2mpb02 sub-PMIC, max77838 and p9220 wireless charger.
  • Battery and charger policy are not yet inventoried.

配置 ​

  • No power component is selected and no regulator or charger driver runs.

操作步骤 ​

  • Inventory regulators, charger and battery reporting from the vendor kernel.
  • Record sleep and resume dependencies before claiming a power transition.

开发经验 ​

  • The firmware leaves power management to S-Boot and UEFI defaults.

完成条件 ​

  • Declared power controls and battery readings match observations; each claimed sleep or resume transition restores dependent peripherals.

当前范围 ​

  • No battery, charger or power-domain driver.

下一步 ​

  • Inventory the PMIC and charger topology from the vendor kernel.

证据 ​

按下一步操作收集证据。

镜像组装 ​

planned

组件: XnuPrelink.

硬件与依赖 ​

  • XNU 10063.141.1 and Darwin 23.6.0 from the iPadOS profile.
  • Android v0 boot image: base 0x10000000, kernel 0x10008000, tags 0x10000100, page size 2048.

配置 ​

  • patch_series covers the arch, SoC, OS and device series in that order.
  • kernel.defconfig = hero2lte_defconfig.

操作步骤 ​

  • Run ./unixnu build kernel, ./unixnu build package and ./unixnu build payload once the kernel inputs exist.
  • Pack the image with ./unixnu bootimg and inspect boot.json before flashing.

开发经验 ​

  • The standalone Mu-Silicium boot image uses the v0 layout and passes the BootShim host tests.
  • A 40 MiB standalone image was written to BOOT, read back byte-for-byte and accepted by S-Boot, reaching UEFI.
  • No XNU kernel, payload or UniXNU boot image has been built for this board.

完成条件 ​

  • Kernel and prelink succeed, the payload contains all declared inputs, and the boot image matches the bootloader format and size limit.

当前范围 ​

  • No kernelcache, trust cache or data ramdisk is available.
  • The UEFI container is validated, but no XNU payload image exists.

下一步 ​

  • Build the kernel now that ArmCpu GICv2 support exists, then supply the kernelcache, trust cache and data ramdisk for the first XNU hardware checkpoint.

证据 ​

按下一步操作收集证据。

诊断 ​

planned

硬件与依赖 ​

  • Porting record CI, UniXNU status output and firmware or kernel logs.

配置 ​

  • The record workflow from the template is kept. unixnu.lock pins the resolved sources.

操作步骤 ​

  • Run python3 scripts/porting-record.py check --device ../UniXNU-hero2lte after each record change.
  • Capture the firmware log before kernel handoff once the log exporter is integrated.

开发经验 ​

  • Host build logs exist locally. The UEFI checkpoint was observed on the panel; no persistent firmware log was captured.
  • The bring-up probe provided visual timer, key and counter evidence without a storage or serial log path.

完成条件 ​

  • Each claimed milestone has a reproducible command, a matching revision and an accessible result.

当前范围 ​

  • No QR log exporter or persistent capture in the firmware yet.
  • XNU handoff and kernel logs cannot be captured on this board yet.

下一步 ​

  • Add a persistent firmware log path before the first XNU handoff.

证据 ​

按下一步操作收集证据。

Released under the BSD-2-Clause-Patent License.

Copyright 2026 UniXNU contributors